HTC-2

Temperature measurement range : -10 ºC ~ +50ºC (-14ºF ~ +122 ºF)

Temperature measurement accuracy : ±2 ºC (3.6ºF)

Temperature resolution : 0.1 ºC (0.1ºF)

Humidity measuring range: 10%~99% RH

Humidity measuring accuracy: 10% RH

Humidity resolution : 1%

Battery: AAA 1.5V 1PCS

1. Push down battery cover “OPEN” on meter back side, and install battery.

2. Time setting: In the initial state, press [MODE] till there is a Di sound, and the

number of minute start flashing; press [ADJ] to adjust number, press [MODE] to set

minute number; then the number of hour start flashing. Repeat above steps to set

hour number, and enter hour system setting. Press [ADJ] to choose "12/24" hour

system, press [MODE] to set. Then it come to month (M) and day (D) setting, repeat

above steps to set date.

3. Alarm setting: In normal clock mode (the two points between hour and minute

flash), press [MODE] once, switch the display for alarm clock mode (clock and

minutes between two points in not flashing). Press [ADJ] to switch " " (alarm) /

"ALarm" (hourly alarm) function; press [MODE] till there is a Di sound, and the

number of minute start flashing, you can set the alarm time (same steps as time

setting), press [MODE] once to exit alarm time setting. When alarm, meter sounds for

one minute, or press any button to stop alarm; When hourly alarm, meter only sounds

“DiDi”.

4. Press [MEMORY] button to display the MAX/MIN/Current temperature/humidity.

5. Memory clear function: in MAX or MIN state, press [MEMORY] for long time till a

Di sound to clear MAX/MIN data.