Specification
RPS2K Series Pen Type Digital Oscilloscope Specifications | ||||
Model | RPS2005 | RPS2010 | RPS2025 | RPS2050 |
Analog Bandwidth | 5MHz | 10MHz | 25MHz | 50MHz |
HORIZONTAL SYSTEM | ||||
Real-time Sample Rate | 50MHzSa/s | 100MHzSa/s | 200MHzSa/s | 400MHzSa/s |
Memory Depth | 32K | 16K | 8K | 4K |
SEC/DIV Range | (0.1us~10s)/div | (33.3ns~10s)/div | (16.7ns~10s)/div | (8.33ns~10s)/div |
VERTICAL SYSTEM | ||||
VOLTS/DIV Range | 100mV—100V (0.1V -0.2V -0.5V -1V -2V -5V -10V -20V -50V -100V) | |||
A/D Converter | 8-bit resolution(256 levels) | |||
VOLTS Accuracy | 2% | |||
Trigger Type | Rising Edger,Falling Edger,Auto Trigger(zero rate),Single Triger | |||
Measurements | ||||
Auto Measure | Frequency,Vmax ,Vmin, Vaver, Vp-p | |||
Cursor Measure | Adjust Cursor Measure arbitrary point Volt | |||
Input | ||||
Input Coupling | AC,DC,GND/Ref (Inner Reference Signal ) | |||
Input Impedance | 1MΩ 30pF | |||
Maximum Input Voltage | 500V-Vpp | |||
Display | ||||
Type | 1.1inch OLED | |||
Resolution | 128*64 | |||
Two Channels | Virtual two channels | |||
Power | ||||
Charger | USB interface share by battery charging and data transfer, output DC 5V,500mA,input AC 140V~250V | |||
Lithium Battery | 3.7V 430mAH | |||
Power | ≤1W | |||
Mechanical | ||||
Size | 180*22*30mm | |||
Weight | 70g(Without battery) | |||