Characteristic Multifunction Network LAN Phone Cable Tester WH8108 LAN Cable Tester 1.Test RJ11/RJ12/RJ45 cable 2.Test telephone wire&UTP/STP cable 3.Judge wrong connection 4.Easy to ide | |
Technology features A person is enough to complete cable continuity check and cable sequence, the easy way Indicates pair integrity of the cable Measure length and pair with or without far-end recognizer Locates the wiring or connection error Measure cable length and determine the distance of open circuit and short circuit Permits you to check wiring error in 5E/6E twisted cord network, coaxial cable and telephone line Applicable for open circuit, short circuit, jumper wire, reverse connection or cross-talk interference Dynamically calibrate cable length and make length measurement as accurate as 97% Simple and easy use, big LCD screen to display test clear Portable unit with long battery life (wait-case or standby mode for over 50 hours) Auto time delay shut off Comes with 1 far-end passive test jack Far end recognizer with prompt voice Single board computer software watchdog design and reliable operating Self-checking function and automatically compensates any change in battery capacity or ambient temperatur | |
Description LCD: 4 x 16 characters big LCD screen (valid visual field 61.6 x 25.2 mm) Type of Tester Cable: STP / UTP twin twisted cable, coaxial cable, telephone line Tester Port Tester RJ45 master port (M), tester LOOPBACK RJ45 port (L), far-end recognizer RJ45 port (R) The extra BNC and RJ11 converters are used to measure and check the continuity of coaxial cable and telephone line. Length Measurement of Twin Twisted Cable: Scope: 1 to 350M (3 to 1,200 FT) calibration Calibration accuracy: 3% (±0.5m or ±1.5 ft) (calibrating cable > 5 M) Shipment accuracy: 5% (±0.5m or ±1.5 ft) (AMP, AT&T Class 5 cable) Unit of Measurement: Display in meter (M) or feet (FT) Length Calibration: User can set self-calibration factor by a given length cable; The length of calibrating cable is more than 5M Wire Sequence and Locating Cable Error Check errors such as open circuit, short circuit, reverse connection, cross over or cross-talk interference Locating Cable: Included 1 far-end passive test jack Working Ambient Temperature: -10°C to 60°C Automatic Time-delay Shut Off Time: The tester is idle for 30 minutes Use 4 x AA batteries Packaging Detail: Gift Box,Slide Blister,Leather bag Item: SC8108 2.6" LCD Network Cable Tester (4 x AA) Dimensions: 7.01 in x 3.15 in x 1.57 in (17.8 cm x 8.0 cm x 4.0 cm) Weight: 6.88 oz (195 g) |
LCD: 4 x 16 characters big LCD screen (valid visual field 61.6 x 25.2 mm)
Type of Tester Cable: STP / UTP twin twisted cable, coaxial cable, telephone line
Tester Port
Tester RJ45 master port (M), tester LOOPBACK RJ45 port (L), far-end recognizer RJ45 port (R)
The extra BNC and RJ11 converters are used to measure and check the continuity of coaxial cable and telephone line.
Length Measurement of Twin Twisted Cable:
Scope: 1 to 350M (3 to 1,200 FT) calibration
Calibration accuracy: 3% (±0.5m or ±1.5 ft) (calibrating cable > 5 M)
Shipment accuracy: 5% (±0.5m or ±1.5 ft) (AMP, AT&T Class 5 cable)
Unit of Measurement: Display in meter (M) or feet (FT)
Length Calibration: User can set self-calibration factor by a given length cable; The length of calibrating cable is more than 5M
Wire Sequence and Locating Cable Error
Check errors such as open circuit, short circuit, reverse connection, cross over or cross-talk interference
Locating Cable: Included 1 far-end passive test jack
Working Ambient Temperature: -10°C to 60°C
Automatic Time-delay Shut Off Time: The tester is idle for 30 minutes
Use 4 x AA batteries
Packaging Detail: Gift Box,Slide Blister,Leather bag
Item: SC8108 2.6" LCD Network Cable Tester (4 x AA)
Dimensions: 7.01 in x 3.15 in x 1.57 in (17.8 cm x 8.0 cm x 4.0 cm)
Weight: 6.88 oz (195 g)